Samsung SH-S182M Not burning

I try to burn on DVD+R with Nero & ImgBurn with all speed 2X to 16X but isn't start to burning.

ImgBurn:


Nero 7:


Nero InfoTool:

Spoiler:

Nero InfoTool 4.4.0.0

Drive Information
------------------
Drive : TSSTcorp CD/DVDW SH-S182M
Type : DVD±R/RW DL Recorder
Firmware Version : SB05
Buffer Size : 2 MB
Date : ?
Serial Number : SH-S182MFirmware
Vendor Specific : 0615
Drive Letter : L:\
Location : 2:0
Mechanism : Tray
Read Speed : 12.0 , 10.0 , 8.0 , 6.0 , 4.0 , 2.0 X
Write Speed : 16.0 , 12.0 , 8.0 , 4.0 X

Read CD Text : Yes
Return C2 Pointers : Yes
Read CD-R : Yes
Read CD-RW : Yes
Read DVD-ROM : Yes
Read DVD-RAM : Yes
Read DVD-R : Yes
Read DVD-RW : Yes
Read DVD-R DL : Yes
Read DVD+R : Yes
Read DVD+RW : Yes
Read DVD+R DL : Yes
Read BD-ROM : No
Read BD-R : No
Read BD-RE : No
Read HD DVD-ROM : No
Read HD DVD-R : No
Read HD DVD-RW : No
Read HD-BURN : No
Read Digital Audio : Yes
Read CD+G : Yes
Read VideoCD : Yes

Write CD-R : Yes
Write CD-RW : Yes
Write DVD-R : Yes
Write DVD-RW : Yes
Write DVD-R DL : Yes
Write DVD+R : Yes
Write DVD+RW : Yes
Write DVD+R DL : Yes
Write DVD-RAM : Yes
Write BD-R : No
Write BD-RE : No
Write HD DVD-R : No
Write HD DVD-RW : No
Write HD-BURN-R : No
Write HD-BURN-RW : No
Buffer Underrun Protection : Yes
Mount Rainier : Yes
SolidBurn : No
Labelflash : No
LightScribe : No
Modes : Packet, TAO, DAO, SAO, RAW SAO, RAW DAO, RAW SAO 16, RAW SAO 96, RAW DAO 16, RAW DAO 96

Region Protection Control : RPC II
Region : None
Changes User : 5
Changes Vendor : 4

CSS : Yes
CPRM : Yes
AACS : No
VCPS : No

Nero log error:

Spoiler:

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.9.6.0
Internal Version: 7, 9, 6, 0

Recorder: <TSSTcorp CD/DVDW SH-S182M>Version: SB05 - HA 2 TA 2 - 7.9.6.0
Adapter driver: <USB 2.0> HA 2
Drive buffer : 2048kB
Bus Type : set to ATAPI (3) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVDRAM GSA-H10N >Version: JL12 - HA 1 TA 0 - 7.9.6.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVDRAM GSA-H10N atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD800BB-00FJA0 atapi Port 0 ID 1 DMA: On
DiskPeripheral : WDC WD400EB-00CPF0 atapi Port 1 ID 0 DMA: On
DiskPeripheral : ST340810A atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
TSSTcorp CD/DVDW SH-S182M L: CdRom10
HL-DT-ST DVDRAM GSA-H10N Z: CdRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523552kB)
Free physical memory: 148MB (151780kB)
Memory in use : 71 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

23.7.2007
Burn DVD Image
6:17:58 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

6:17:59 PM #2 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using DVD media

6:17:59 PM #3 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2040895 (453:31.70, 3986MB)

6:17:59 PM #4 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD DVD)

6:17:59 PM #5 Text 0 File DlgWaitCD.cpp, Line 2964
Recorder: TSSTcorp CD/DVDW SH-S182M, Media type: DVD+R
Disc Manufacturer ID: MBIPG101, Media Type ID: R05, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 7

6:17:59 PM #6 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

6:17:59 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 2040896 (2040896) = #2040896/453:31.71
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2040896 blocks [L: TSSTcorp CD/DVDW SH-S182M]
--------------------------------------------------------------

6:18:00 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [L: TSSTcorp CD/DVDW SH-S182M] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4179755008, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|__ ____NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2040896 | 2040896 | 0x00
2040896 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

6:18:00 PM #9 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

6:18:00 PM #10 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-No, small files-No (<64KB)

6:18:00 PM #11 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 16x (22,160 KB/s)

6:18:00 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

6:18:00 PM #13 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MBIPG101
Media type ID: R05
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 4D 42 49 50 47 - 31 30 31 52 30 35 01 38 ...MBIPG101R05.8
23 54 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #T..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

6:18:00 PM #14 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MBIPG101
Media type ID: R05
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 4D 42 49 50 47 - 31 30 31 52 30 35 01 38 ...MBIPG101R05.8
23 54 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #T..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

6:18:00 PM #15 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MBIPG101
Media type ID: R05
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 4D 42 49 50 47 - 31 30 31 52 30 35 01 38 ...MBIPG101R05.8
23 54 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #T..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

6:18:00 PM #16 Text 0 File DVDR.cpp, Line 8372
Drive: TSSTcorp CD/DVDW SH-S182M
Book Type request [TSST]: DVD-ROM
Changing the Book Type was finished successfully, return code 0

6:18:00 PM #17 CDR -1207 File DVDR.cpp, Line 6477
Book Type automatically set to: DVD-ROM

6:18:00 PM #18 Text 0 File DVDPlusRW.cpp, Line 675
Start write address at LBA 0
DVD high compatibility mode: Yes

6:18:00 PM #19 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 74390400

6:18:35 PM #20 SPTI -1106 File SCSIPassThrough.cpp, Line 179
CdRom10: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 73 03
Buffer x059f0040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

6:18:35 PM #21 CDR -1106 File Writer.cpp, Line 303
Power calibration error
L: TSSTcorp CD/DVDW SH-S182M

6:18:37 PM #22 SPTI -1046 File SCSIPassThrough.cpp, Line 179
CdRom10: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x06
CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 06

6:18:37 PM #23 Phase 127 File dlgbrnst.cpp, Line 1762
Generating DVD high compatibility borders

6:18:37 PM #24 Text 0 File DVDPlusRW.cpp, Line 935
EndDAO: Last written address 0

6:18:37 PM #25 CDR -1046 File WriterStatus.cpp, Line 162
Illegal disc
L: TSSTcorp CD/DVDW SH-S182M

6:18:37 PM #26 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once

6:18:39 PM #27 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 16x (22,160 KB/s)

6:18:40 PM #28 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

6:18:52 PM #29 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed

6:18:52 PM #30 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Jam it back in, in the dark.

6:18:35 PM #21 CDR -1106 File Writer.cpp, Line 303
Power calibration error
L: TSSTcorp CD/DVDW SH-S182M

This error may be a culprit. I used to get that alot at home, when I would use my external DVD+R/RW/DL drive. I couldn't quite find out how to fix it. I'd just restart and try burning later and that would work.

Just a suggestion..

There's nowhere I can't reach.

How old is your burner?

How ya doing, buddy?

Optical drives do die. And fairly frequently at that. The solution may be to shell out another $30 and get another drive.

I am a dolphin, do you want me on your body?

Power calibration error usually mean it's probably never going to write a DVD+R ever again. I've had a similar problem and it ended up with me buying another one. However, I was still able to burn CD-Rs...

Arain's right; it's dead. 30 bucks on pricegrabber. They're pretty much all the same.

I was speaking idiomatically.

I have a similar problem: My HP DVD+/-RW will start to burn a DVD, but at about 3% complete the buffer will reach 100% and progress will never continue, requiring a manual power-down to clear Nero 6 out of the processes. I'm pretty sure it's not Nero because it works with my other DVD burners. Anyone had a problem like this before, or know how to fix it without buying a new drive?

What kind of toxic man-thing is happening now?

Originally Posted by Zergrinch

How old is your burner?

8 months,I only used 8 to 10 times only to burn

FELIPE NO

That sucks RYU. Have you tried pulling it out and making sure all the cables are firmly in place? Is it too late to get it returned?

How ya doing, buddy?

Originally Posted by xiaowei

That sucks RYU. Have you tried pulling it out and making sure all the cables are firmly in place? Is it too late to get it returned?

yeah is too late my warrant for only 6 months.all cables are firmly

Jam it back in, in the dark.