Cant connect to ftp

Hey guys I cant connect to a certain ftp setup for me, I use Smartftp and this is the log..

[23:52:16] SmartFTP v2.5.1005.22
[23:52:16] Resolving host name "71.xxx.xx.xx."
[23:52:16] Connecting to 71.xxx.xx.xx Port: 28
[23:52:17] Connected to 71.xxx.xx.xx.
[23:52:18] 220 Serv-U FTP Server v6.4 for WinSock ready...
[23:52:18] USER Tom
[23:52:19] 331 User name okay, need password.
[23:52:19] PASS (hidden)
[23:52:20] 230 User logged in, proceed.
[23:52:20] SYST
[23:52:21] 215 UNIX Type: L8
[23:52:21] Detected Server Type: UNIX
[23:52:21] FEAT
[23:52:22] 211-Extension supported
[23:52:23] CLNT
[23:52:23] MDTM
[23:52:23] MDTM YYYYMMDDHHMMSS[+-TZ];filename
[23:52:23] SIZE
[23:52:23] SITE PSWD;EXEC;SET;INDEX;ZONE;CHMOD;MSG
[23:52:23] REST STREAM
[23:52:23] XCRC filename;start;end
[23:52:23] MODE Z
[23:52:23] MLST Type*;Size*;Create;Modify*;Win32.ea*;
[23:52:23] 211 End
[23:52:23] Detected Server Software: Serv-U 5.x/6.x
[23:52:23] CLNT SmartFTP 2.5.1005
[23:52:24] 200 Noted.
[23:52:24] PWD
[23:52:25] 257 "/" is current directory.
[23:52:25] TYPE A
[23:52:26] 200 Type set to A.
[23:52:26] MODE Z
[23:52:27] 200 MODE Z ok.
[23:52:28] PASV
[23:52:29] 227 Entering Passive Mode (192,168,0,102,10,67)
[23:52:29] Opening data connection to 192.168.0.102 Port: 2627
[23:52:29] MLSD
[23:52:50] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.


And also, is there another way to share large files like ftp but isnt ftp privately without having to upload at those rapidshare sites?

Most amazing jew boots

Will non-passive mode work?

There's nowhere I can't reach.

Hi Zergrinch thanks for your reply I hope you can help me, Here I tried connecting again using PORT mode still get an error:

WinSock 2.0 -- OpenSSL 0.9.8b 04 May 2006
[R] Connecting to 71.231.51.20 -> IP=71.231.51.20 PORT=28
[R] Connected to 71.231.51.20
[R] 220 Serv-U FTP Server v6.4 for WinSock ready...
[R] USER Tom
[R] 331 User name okay, need password.
[R] PASS (hidden)
[R] 230 User logged in, proceed.
[R] SYST
[R] 215 UNIX Type: L8
[R] FEAT
[R] 211-Extension supported
[R] CLNT
[R] MDTM
[R] MDTM YYYYMMDDHHMMSS[+-TZ];filename
[R] SIZE
[R] SITE PSWD;EXEC;SET;INDEX;ZONE;CHMOD;MSG
[R] REST STREAM
[R] XCRC filename;start;end
[R] MODE Z
[R] MLST Type*;Size*;Create;Modify*;Win32.ea*;
[R] 211 End
[R] CLNT FlashFXP 3.4.0.1145
[R] 200 Noted.
[R] PWD
[R] 257 "/" is current directory.
[R] TYPE A
[R] 200 Type set to A.
[R] MODE Z
[R] 200 MODE Z ok.
[R] Listening on PORT: 4548, Waiting for connection.
[R] PORT 192,168,232,46,17,196
[R] 200 PORT Command successful.
[R] LIST
[R] 150 Opening ASCII mode data connection for /bin/ls.
[R] 426 Data connection closed, transfer aborted.
[R] List Error


and this one is from smartftp also in PORT mode: it doesnt mention an error unlike flashfxp nor does it list the files on the server it just shows this noop thing i dont know..

[12:25:17] 220 Serv-U FTP Server v6.4 for WinSock ready...
[12:25:17] USER Tom
[12:25:17] 331 User name okay, need password.
[12:25:17] PASS (hidden)
[12:25:18] 230 User logged in, proceed.
[12:25:18] SYST
[12:25:18] 215 UNIX Type: L8
[12:25:18] Detected Server Type: UNIX
[12:25:18] FEAT
[12:25:18] 211-Extension supported
[12:25:19] CLNT
[12:25:19] MDTM
[12:25:19] MDTM YYYYMMDDHHMMSS[+-TZ];filename
[12:25:19] SIZE
[12:25:19] SITE PSWD;EXEC;SET;INDEX;ZONE;CHMOD;MSG
[12:25:19] REST STREAM
[12:25:19] XCRC filename;start;end
[12:25:19] MODE Z
[12:25:19] MLST Type*;Size*;Create;Modify*;Win32.ea*;
[12:25:19] 211 End
[12:25:19] Detected Server Software: Serv-U 5.x/6.x
[12:25:19] CLNT SmartFTP 2.5.1005
[12:25:19] 200 Noted.
[12:25:19] PWD
[12:25:20] 257 "/" is current directory.
[12:25:50] NOOP
[12:25:51] 200 Command okay.
[12:26:21] NOOP
[12:26:22] 200 Command okay.
[12:26:52] NOOP
[12:26:53] 200 Command okay.

This thing is sticky, and I don't like it. I don't appreciate it.

The ftp owner probably doesn't have passive mode set up properly, so use active mode and manually configure your public IP address in the client settings (try http://www.whatismyip.org to check your IP).

I am a dolphin, do you want me on your body?

Hi BigBlah, Im not a power user with ftps, I know Ive set mine to Active mode or Port mode, but where in Smartftp can I change that public IP you mentioned?

I was speaking idiomatically.