[Help] Signal Noise on PS2: Need Help

Okay, I've had this problem for weeks now, and I've been racking my brain trying to figure out a solution, so I hope you can help me here.

I recently purchased a Samsung 4095D ("40 LCD, 1080p). Everything runs perfectly on it with the exception of my PS2 (last model version with the HDD expansion). I get these transparent, wavy lines, sort of what you get on a bad cable reception, darting around the screen. I've looked around forums and asked people on AIM for possible solutions, and none have worked so far.

I've got a PS3, VCR, Gamecube, and Motorola Comcast HD Receiver all hooked up to the TV, each plugged seperately in two different outlets. I also have a PC hooked up (in a seperate outlet opposite the wall) to the TV via a DVI/HDMI cable.

1. I tried unplugging everything but the PS2.

2. I tried plugging the PS2 and TV directly to the outlets.

3. I tried a Gamecube on the same Component Output. No signal noise, runs perfectly.

4. I tried using a power conditioner (monster brand)

5. I tried a 3 prong grounding adaptor (changes 3 prongs to 2 prongs)

6. I tried plugging the PS2's power cord to different outlets.

7. I tried plugging the PS2's power cord to outlets OUTSIDE of my room (with an extension cable).

8. I tried changing the component cable to the official Sony brand cables.

9. I tried changing the component cable to the Monster brand cables (even worse quality, the cables won't even stick to the TV)

10. I tried a completely different PS2 system (used, same model).

Despite all these failed tests, I think I've narrowed down the problem to the component cables itself.

1. I changed the component cables to AV cables. No signal problem.

2. I got the same signal noise on my GC and Cable Receiver. Jiggling their cables somewhat fixed the problem immediately.

3. Despite that, I unplugged the Cable TV's component cables and removed them completely; no change in the signal.

So it seems that something is causing interference with the PS2's component output. I just have to find a way to remove this problem, and I'm nearly out of ideas. All I can think of trying now is either a Slim PSTwo (even if it worked, I want the PS2 with HDD expansion), or a component system selector that can isolate any interference.

I really hope you guys can help me out. If you need any more information, ask.

Jam it back in, in the dark.

You said that the Gamecube had signal noise, but in the beginning you didn't?

There's nowhere I can't reach.

That's right. It only happened once so far, ever, on the Gamecube. I just had to put a little pressure on the cables and it cleared up right away. The PS2 has not shown any similar improvement, even when I'm putting extra force on those cables.

This thing is sticky, and I don't like it. I don't appreciate it.

I would report back after trying a slimeline PS2. I have had a similar problem with my 360, which others have reported as well.

It's probably nothing power related, just a case of shoddy assembly of video components...but just to be sure, I recommend testing out a slimeline model.

I am a dolphin, do you want me on your body?

Even if the Slimline does work, it lacks a HDD expansion, which I use for all my hard drives full of burned games (I won't try to pin this on karma). I'll still try it, and I certainly hope it does work, but what I plan to do afterwards is still unknown.

Of course all of this would be easily overlooked if the PS3's BC wasn't so borked. Frankly, I wish they wouldn't wait until March to release this "big, magical update that will fix everything".

I was speaking idiomatically.

Its really just rumor and speculation that the big update will do more than change the Playstation store and a few other misc. things.

Did this happen right after you stole another game? If so, maybe it really is karma saying "enough is enough". ... Just kidding. There are ways to do this on the slim anyway, but it does require a bit of purchasing.

What kind of toxic man-thing is happening now?

I checked, and it seems the only option that actually works requires you to open up the Slimline and insert some other device that costs almost as much as the actual system. No thanks.

I would be happy if the Slimline didn't have this problem, so at least I can confirm it's a problem with the system, not the TV. If not, then I don't know what I'm going to do.

FELIPE NO

Naw; USBeXtreme works well for the slim and it doesn't cost much.

http://www.hdadvance.com/usb_extreme_whatis.htm

What, you don't want my bikini-clad body?

Whoa, interesting. So this lets you connect a standard HDD to the Slim PS2 via USB? Can HD Loader work in conjunction with it?

Jam it back in, in the dark.

USBeXtreme isn't optimized for a lot of the games released, many had speed issues and graphic errors. Never tried using both programs, but I doubt USBeXtreme will work together with HDLoader.

There's nowhere I can't reach.

Okay, I should update the situation. Basically, it isn't just a problem with the PS2, since the Wii has the same flickering noise on component. I thought it was a problem with the TV, so I exchanged it for the same model, but the problem was still there. After some more experimenting and general hair pulling, I discovered something; taking out the red and white audio cables from the TV, while leaving in the red green and blue cables plugged in produced no noise at all. This is strange, but it seems that there's a sound issue which transfers as a video distortion on the screen.

Now that I've seem to found the problem, I need to find out how to take care of it. Aside from plugging the audio to my home theater (I'd need an extension cord anyway), is there some sort of adaptor or extension that can plug the audio to the TV and shield it from whatever interference it's giving to the picture?

Also, kindly requesting someone to move this to Help Desk.

How ya doing, buddy?

could it be something like this?

http://boardsus.playstation.com/play...scending&page=

the problem is called ground loop I'm not sure if it your problem, but I just found out that i have this problem with my ps3, I'm going tomorrow to buy the adapter they suggest in that thread. I'll tell you more when I'll have it and test it.

I am a dolphin, do you want me on your body?

Yes, I've heard of ground loop, but I was under the impression it had to do with hissing or buzzing, or any problems with your electricity. I tried a monster surge protector, so I don't think it's an issue with my power supply anymore. Also, aren't ground loop isolators mainly for coaxial input?

What I need, assuming it exists, is a sort of adaptor or something to shield the interference that the audio component cables are giving to the video compontent cables.

Additional Spam:
Think I found what I need to fix this.

http://www.impactacoustics.com/prod...=1009&sku=41147

That diagonal thing they mention sounds exactly what I have. But first I need to buy this in a store and try it, in case it doesn't work. What's more likely to carry these things? Best Buy, Circuit City, Radioshack (the one near me doesn't seem to have stuff like this)?

I was speaking idiomatically.