BIOS/Software problems

Ok before i state the problem i will put the facts

I just finished building a PC from scratch.

1. 865PE Neo2 MS-6728 (v1.X) ATX Motherboard (MKSI)
2. 1 512 DDR RAM (for now)
3. 2 Western Digital HDD's
*WinXP is already one my master and the other is a slave
4. CD/DVD RW
5. Video Card (took it out of an old PC until my other one comes in)

The problem I have is Windows will not start. It will bring me to the advance seclection where i could choose safe mode or wherever, but whatever i chose the system will restart itself. (This occured with my old HDD's which already had WinXP on it)

So after this i decided to put a fresh Maxtor HDD inside of the PC and install a fresh copy of windows. Well it formatted the HDD fine and everything but after awhile a blue error came up saying something like
Page Not Found On Unpaged...i don't remember the error code exactly but it was something like that.

How can i fix this problem?

Jam it back in, in the dark.

Well ok the ram is not the problem...its just acting up suddenly...i was able to go through with no failure this time but then suddenly I got another blue screen WHILE windows was installing

There's nowhere I can't reach.

Using a regular P4 power supply...Actually right now i found something wierd out...

WHen my ribbon cables are plugged in...my HDD's and DVD Rom does not have any power to them...yet when I unplug the ribbon cable and keep the power cable in...everything is spinning...I don't get it no more...I'm getting really frustrated

This thing is sticky, and I don't like it. I don't appreciate it.

Maximum Power 520W
Main Connector 20+4-Pin
Dual +12V Yes
Modular Cabling Support No
Input Voltage 115/230 V
Input Frequency Range 50/60Hz
Input Current 10A @ 115V, 5A @ 230V
Output +3.3V@40A, +5V@45A, +12V1@16A, +12V2@15A, -12V@1.0A, +5VSB@2.0A
MTBF 100,000 hours at 25'C, full load


Connectors 1 x Main connector (20+4 pin)
1 x 12V (P4)
1 x 12V (8 pin)
6 x peripheral
4 x SATA
2 x Floppy

Double Post:
Ok forget about last post...everything is finally starting up and both my HDD's are being read and so is my CD/DVD Writer...but now my HDD"s don't want to format, it gives me some SCSI error about my HDD cannot be formatted and check the cables and everything...

It always happens AFTER the format reaches 99% then BOOM...gives me a error and I cannot get past it or anything...

I am a dolphin, do you want me on your body?

Well how do I use this...I see its an ISO but nothing is giving me a download link and the PC i'm using right now is not mine to get bittorent files or such and such...

So a link would be very helpful and a little incite on how this Knoppix works. Also what if this doesn't work...Why is WinXP not formatting them anyways only stopping at 99% exactly

Most amazing jew boots

Sounds nice...hopefully this works...but can somebody provide a link to a working download

What kind of toxic man-thing is happening now?

Ok i thought about this

How about me putting my original HDD as a slave inside of someone's else PC to format it through windows...then put the jumper back as a master HDD inside of my PC and let windows do its thing?

FELIPE NO