 85242 |
 35212 |
|
|
||
|
|
|||||||
| Welcome to the Exploding Garrmondo Weiner Interactive Swiss Army Penis. |
|
GFF is a community of gaming and music enthusiasts. We have a team of dedicated moderators, constant member-organized activities, and plenty of custom features, including our unique journal system. If this is your first visit, be sure to check out the FAQ or our GFWiki. You will have to register before you can post. Membership is completely free (and gets rid of the pesky advertisement unit underneath this message).
|
 |
|
|
Thread Tools |
|
Chocorific
 Member 6745 Level 38.97 May 2006 
|
You always have the option of installing additional PCI/PCIe PATA/SATA adapter on your board. Assuming that the board already has a (PATA) controller with 2 channels and you have N free PCI/PCIe slots on the board, you can have:
(N + 1) * 2 * 2 harddrives in your system (two per channel: master and slave) I'm assuming that the additional controller supplies two channels. However I think your problem won't be IDE channels but space to install the actual harddrives  Jam it back in, in the dark. |
|
Chocorific
Member 6745 Level 38.97 May 2006
|
With only 2 additional PCI controllers you can drive up to 12 drives, I don't think you want to pack 12 drives, each 3.5 inch into one case. Drives produce heat as well, I really don't recommend running more than 4 drives in a case... without additional cooling measures and noise blocking.
I have currently two 750GB drives installed in noiseblocker boxes, fused together to a (in fact multiple) RAID1 device. Drives are SATA however. Works quite well. Disk access is almost non-audible. Howerver I had to do some power management and AAM tuning to get noise that low. Most amazing jew boots |
LiquidAcid